What if the dust cup gets stuck with dust?

To improve the filtration efficiency, the vacuum uses a cyclone separation system. There is hair and particles rotating against the inner wall of the dust cup. At the same time, in order to ensure that the cyclone system assembly can be smoothly removed from the inner wall of the dust cup, there is a certain gap between the cyclone system assembly and the inner wall of the dust cup. Therefore, it is normal that there is dust stuck between the dust cup and the cyclone system assembly; It is not a functional problem such as the failure of the dust cup seal ring. When the dust collection is completed, remove the dust cup, rotate and take out the cyclone system assembly, pour the dust, and clear up the dust cup and cyclone system assembly to finish this process.